Table of Contents
Advertisement
6.2.7 Setup before shipment
Before shipment from service, perform the following setup or initialization.
1) Initial values that are shown in the List of EEPROM contents in Section 3.3.1.
(Main power of the module is turned off.)
Clearing the error codes
Select EXIT menu with the ↑ key or ↓key and press the
<ENTER> key.
Shipping the set screen is displayed, and "Y" is pushed.
In shipping the set processing, there is a thing that the power supply of the module turns
on automatically.
The shipment setting ends, and when the power supply of the module is on, the power
supply is turned off automatically.
"N" When the key is pushed, the shipment setting is not done, and the power supply is
turned off.
Shipment from service setting? (Input the "Y" or "N" key)
-77-
Advertisement
Table of Contents
