Sony REA-C1000 Operating Instructions Manual page 38

9
Configure the following settings.
Detection area
Move the four blue circles displayed on the preview
screen to mark the detection area for tracking within
the home position.
A person will be tracked when they enter this area.
Sensitivity
Set the response sensitivity for tracking when the
person to track starts to move.
[Normal]: Respond with standard sensitivity.
[Sensitive]: Respond with higher sensitivity than
the [Normal] setting.
Start tracking automatically
Place a check mark in [Start Tracking
Automatically] to automatically start tracking when
a person is detected within the home position
detection area. Leave the checkbox empty when you
want to start tracking manually.
Also, always set [Tracking Start Time] for
automatic tracking.
Tracking start time
Automatic tracking starts when a person has been
captured continuously for a duration exceeding the
time set in [Tracking Start Time].
Tracking tally lamp
Enabled when a camera equipped with a tally lamp
is connected. Insert a check mark to turn on the tally
lamp of the tracking camera.
For details about cameras that support this function,
see "Supported Cameras and Available Camera
Functions" (page 54).
10
When finished, click the [Next] button.
11
Configure the following settings.
Mask
Set the mask areas in order to prevent false detection
of objects other than the person to be tracked during
tracking.
Move the four gray circles displayed on the preview
screen, as required, to adjust the height to
effectively narrow the detection area during
tracking.
The mask areas are excluded from the detection
target during tracking.
Note
The mask areas must not cover the area specified for
the home position detection area.
38