Running The Handwriting Extraction Application - Sony REA-C1000 Operating Instructions Manual

[Crop at Center of Board]
When the output field of view is set to [Cropped
View], insert a check mark in [Crop at Center of
Board] so that the cropped image is centered at the
center of the extraction area horizontally.
[Crop at Center of Board] is enabled when [Number
of Boards(Horizontal)] and [Number of
boards(Vertical)] are both set to 1 for the horizontal
extraction range and the number of divisions is set
to an even number in [Cropped View].
Note
[Crop at Center of Board] cannot be selected when
the number of divisions is set to an odd number in
[Cropped View].
For example, if the number of division is set to 4 and
a check mark is placed in [Crop at Center of Board],
the extraction range is divided by 3.
This setting is useful when you want to capture a
speaker who has a high probability of staying in the
center of the angle of view, such as when the
blackboard or whiteboard is horizontally long but
only the center part is used.
[Variable View]: Can be selected when [No. of
Boards(Vertical)] is set to 2. This mainly outputs
a wide angle view image, but also zooms and
crops the position where the person is located
every few minutes.
The following shows a display example with
wide field of view and a display example at the
zoom field of view.
Note
When [Cropped View] or [Variable View] is
selected, if a face is partially obscured, due to
wearing a mask or other reason, appropriate
operation may not be possible.
9
When finished, click the [Done] button.
The setup is saved in the unit.
Running the Handwriting
Extraction application
Run this application to extract text and drawings from a
specified drawing board area from the input video and
then output the extracted video.
1
Select [Handwriting Extraction] from
[Applications].
2
Click the [Run] button.
The run screen appears.
33