Connecting a
DOS module
Adding and dispensing chemical agents
DOS modules
Machines with a dispenser for powder detergent in the door can
be fitted with an additional external dispensing module (DOS module)
for liquid process chemicals.
This is not possible for the version with an internal dispensing system
for liquid cleaning agents.
External dispensing modules are fitted by the Miele Customer Service
Department. Internal dispensing systems cannot be retrospectively
fitted.
The DOS module is supplied with its own installation instructions.
Before fitting the DOS module, compare the connection data
(voltage and frequency) on the data plate with that on the data
plate of your machine. If the data does not match, the module
could sustain damage. If in any doubt, consult an electrician.
Power supply for DOS 1, cleaning agent.
Connection for dispensing hose.
Connect the module to the electricity supply.
To connect the dispensing hose, release the hose clip on a free
connector and remove the safety cap.
Push the dispensing hose onto the connector and secure it with a
hose clip.
Unused connectors must be blanked off with safety caps to
prevent the leakage of wash fluid.
45