Miele PG 8581 Operating Instructions Manual page 17


The amount of residual solvents and acids on items going into the
cabinet should be minimal.
There should be no more than a trace of any solvents with a flash
point of below 21 °C.

Chlorous solutions, in particular hydrochloric acid, must not be
placed in the cabinet.

Ensure that solutions or steam containing chlorides or hydrochloric
acid do not come into contact with the stainless steel outer casing of
the machine in order to avoid any damage through corrosion.

After any plumbing work the water pipework to the machine will
need to be vented. If this is not done, components can be damaged.

The gaps between a built-in machine and adjacent cabinetry must
not be filled e.g. with silicone sealant as this could compromise the
ventilation to the circulation pump.

Follow the installation instructions in the operating and installation
instructions.
Use of components and accessories

Only use original spare parts and accessories from the
manufacturer, which are suitable for the application they are required
for. Model designations are available from Miele.

Only use Miele mobile units, baskets, modules and inserts with this
washer-disinfector. Using mobile units, baskets, modules and inserts
made by other manufacturers, or making modifications to Miele
accessories can cause unsatisfactory cleaning results, for which
Miele cannot be held liable. Any resultant damage would not be
covered by the guarantee.
Warning and Safety instructions
17