Siemens CP 1626 Operating Instructions Manual page 40

Operating hardware
4.3 Web server
Symbol Color
black
green
yellow
red
-
Navigation to other module levels
The status of individual communications processors/modules/submodules is displayed when
you navigate to other module levels:
● To higher module levels via the links in the display of the module levels
● To lower module levels via the links in the "Name" column
40
Meaning
Component cannot be accessed/Status cannot be determined
"Status not available" is always displayed when the CP 1626 is in STOP or during start up
•
evaluation by "Report system error" for all configured I/O modules and I/O systems after re-
starting the CP 1626.
However, this status can also be displayed temporarily during operation if a diagnostic inter-
•
rupt burst occurs on all communications processors.
It is not possible to determine the status of communications processors on a subsystem that
•
is connected to a communications processor.
Maintenance required
Maintenance demanded
Error - component failed or faulty
Error in a lower communications processor level
Operating Instructions, 11/2018, C79000-G8976-C434-03
CP 1626