Siemens CP 1626 Operating Instructions Manual page 33

Enable automatic updates
The following Web pages can be updated automatically:
● Start page
● Diagnostics buffer
● Module information
● Information on communication
● Topology
● Media redundancy
Follow the steps below to activate automatic update:
1. Select the CP 1626 in the network view.
2. In the "General" tab go to "Web server".
3. Select the "Enable automatic update" check box.
4. Enter the update interval in seconds.
Note
The update interval set in "STEP 7 Professional (TIA Portal)" is the shortest update time.
Larger amounts of data or multiple HTTP connections increase the update time.
Set the language for the Web server
Select a maximum of two of the installed languages available for display devices for the
Web. Follow the steps outlined below:
1. Select the CP 1626 in the network view.
2. In the "General" tab go to "Web server".
3. Select the required languages.
CP 1626
Operating Instructions, 11/2018, C79000-G8976-C434-03
Operating hardware
4.3 Web server
33