Siemens CP 1626 Operating Instructions Manual page 24

Configuration
3.1 Loading I&M data
Where do you define which I&M data is loaded?
You define which I&M data you wish to load into the IO controller in the "Load preview"
dialog. You have the following options in the drop-down list of the "Identification and
maintenance data (I&M)" row:
● Load nothing
The checkbox for the IO controller and the checkboxes for the I&M data to be loaded are
cleared. This setting has the effect that no I&M data is transferred to the real hardware
during loading.
● Load data
The checkbox for the IO controller and the checkboxes for the I&M data to be loaded are
selected. This setting has the effect that the respective I&M 1, I&M 2 and I&M 3 data is
transferred to the IO controller during loading.
● Load selected
You select the checkboxes of the IO controller into which you want to load I&M data. You
also select the checkboxes of the identification data that you want to load. This setting
has the effect that the selected I&M data is transferred to the selected IO controller during
loading.
Note
The I&M data is loaded into the real hardware in the form that you specified in the properties
of the affected IO controller and its IO devices. There is no language dependency.
24
Operating Instructions, 11/2018, C79000-G8976-C434-03
CP 1626