Table of Contents
Advertisement
Figure 122
1. Antifreeze tank
2. Drilling-fluid valve (shown
in the
position)
ON
5.
Connect the spray-hose attachment to the fitting
(Figure
123).
Figure 123
6.
Setup up the pump to clean water
a Drilling-Fluid Source (page
Turn the spray-hose attachment switch to the
O
position
(Figure
N
3. Antifreeze valve (shown in
the
position)
OFF
Connecting to
52).
122).
7.
Turn the drilling-fluid pump to the O
through the display screen; refer to the Main
Drill Functions Displayed in the Pressure Screen
in the Software Guide.
8.
Using the spray-hose attachment, hold down the
lever and spray down the machine and pipes.
Cleaning Plastic and Resin
Parts
Avoid using gasoline, kerosene, paint thinner, etc.
when cleaning plastic windows, the console, the
instrument cluster, the monitor, gauges, etc. Use only
water, mild soap, and a soft cloth when you clean
these parts.
Using gasoline, kerosene, paint thinner, etc. to clean
a plastic or resin part will cause it to discolor, crack,
g234644
or deform.
g220261
98
position
N
Advertisement
Table of Contents
