Silvercrest SSJ 300 A2 Operating Instructions Manual page 35

Insert the seal 21
4. Place the seal 21 into the working con-
tainer 8.
Mount the working container 8
5. Place the working container 8 on the
with
base unit 13
pointing to the open lock symbol
6. Turn the working container 8 clockwise
until the marking points to the closed
lock symbol .
NOTE: if you want to make a sorbet, skip
the following two assembly steps. Insert the
sorbet assembly 19 instead of the holder 7
and the screen assembly 6 (see "Insert the
sorbet assembly" on page 35).
21
8
13
the marking
.
Insert the holder 7
7. Place the holder 7 into the working
container 8.
7
8
33
GB