Transferring The Manual Settings In Mindsphere; Starting Mindsphere Data Transfer - Siemens SENTRON 7KN POWERCENTER 3000 Manual

5.5.2.3

Transferring the manual settings in MindSphere

When the MindSphere data source setup is written, the data points are set up in the asset and
are made available in the MindSphere applications.
After transferring the manual settings, the data points must be assigned individually to
Aspects & Types in the MindSphere asset manager.
See chapter Configuring data in the Asset Manager
(https://support.industry.siemens.com/cs/ww/en/view/109755908).
5.5.3

Starting MindSphere data transfer

Data transfer to MindSphere can be started via "Web user interface → Settings → Cloud →
MindSphere → Data transfer" or set to autostart so that it starts after power on.
Of course, the service can be stopped and started again, e.g. if reparameterization (see
Grouping the information (Page 64) and Transferring the setup to MindSphere (Page 67)) is
necessary.
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03
5.5 Communication with MindSphere
Functions
67