Write Protection In The Web User Interface - Siemens SENTRON 7KN POWERCENTER 3000 Manual

Functions
5.2 Web user interface
• Settings relating to the current application are grouped together under "General". Services
can be activated or deliberately deactivated, for example, for security reasons.
• Related settings of the communication interfaces are to be found in "Communication".
These are active immediately after they have been saved.
• Under "Cloud", the settings for MindSphere can be made, in particular for connection to
powermind and a further cloud system.
• Under "Actions", 7KN Powercenter 3000 administrator actions are possible.
Note
Security aspects must be considered when making these settings.
All settings are saved in a project file (*.splx), which can be exported with "Settings → Actions
→ Project" and used in powerconfig or a further 7KN Powercenter 3000.
5.2.3

Write protection in the web user interface.

In 7KN Powercenter 3000, write protection for the web user interface can be activated and
deactivated for the external communication interface.
In this way, views can be protected from being modified, for example.
Note
When write protection is activated, those elements in the web user interface that result in
changes are grayed out or hidden completely. This means that if the elements described here
are not visible in your web user interface, it may be because write protection is active. The
status of the write protection is shown by a padlock icon in the top-right corner during a
connection via the external interface.
52
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03