Operating Displays Of The Devices - Siemens SENTRON 7KN POWERCENTER 3000 Manual

3.2.1

Operating displays of the devices

LED name
PC ON/WD
L1 RUN/STOP
L2 ERROR
L3 MAINT
L1 RUN/STOP
and
L2 ERROR
and
L3 MAINT
*) See: Settings → Actions → Device
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03
Status
Off
Green
Flashing green / yellow (4 Hz)
Yellow
Flashing red (4 Hz)
Off
Flashing green (2 Hz)
Green
Yellow
Off
Red
Yellow
Off
Flashing yellow (2 Hz)
Yellow
Red
Flashing yellow (2 Hz)
3.2 Design of the devices
Description
No voltage
BIOS active
Power ON self-test
Idle state / shutdown
Fault monitoring has triggered
Not used
7KN Powercenter 3000 starting
7KN Powercenter 3000 active
Not used
Not used
Serious error
Alert
Not used
Firmware updating (do not switch off)
Not used
Not used
The device "identifies" itself.
• An "Activate blinking mode" has been started
via powerconfig in the search function:
Ethernet.
• Via the web user interface, the command
"Identify device" has been executed
*)
Description
15