Sony DSX-M80 Operating Instructions Manual page 84

Marine audio media receiver with bluetooth and siriusxm support
Hide thumbs Also See for DSX-M80:
Table of Contents

Advertisement

SUBWOOFER (subwoofer)
Item
SUBW LEVEL
(subwoofer level)
SUBW PHASE
(subwoofer phase)
SUBW POS (subwoofer position)
LPF FREQ
(low pass filter frequency)
LPF SLOPE (low pass filter
slope)
HPF (high pass filter)
Item
HPF FREQ (high pass filter
frequency)
HPF SLOPE (high pass filter
slope)
AUX VOLUME (AUX volume)
Adjusts the volume level for each connected auxiliary device: [+18 dB] – [0 dB] – [-8 dB]. This setting negates the need
to adjust the volume level between sources. (Available only when the AUX is selected.)
BT AUDIO VOL (BLUETOOTH audio volume)
Adjusts the volume level for each connected BLUETOOTH device: [+6 dB] – [0 dB] – [-6 dB]. This setting negates the
need to adjust the volume level between sources.
(Available only when the BT audio, application or Pandora® is selected.)
MAX VOLUME (maximum volume)
Sets the maximum volume level of the unit: [30] – [50].
Adjusts the subwoofer volume level:
[+10 dB] – [0 dB] – [-10 dB].
([MUTE] is displayed at the lowest setting.)
Selects the subwoofer phase: [NORMAL], [REVERSE].
Selects the subwoofer position: [NEAR], [NORMAL], [FAR].
(Available only when [F/R POSITION] is not set to [OFF].)
Selects the subwoofer cut-off frequency: [50Hz], [60Hz], [80Hz], [100Hz],
[120Hz].
Selects the LPF slope: [1], [2], [3].
Selects the front/rear speaker cut-off frequency: [OFF], [50Hz], [60Hz], [80Hz],
[100Hz], [120Hz].
Selects the HPF slope (effective only when [HPF FREQ] is set to other than
[OFF]): [1], [2], [3].
5-006-644-11(1) Copyright 2019 Sony Corporation
61
Detail
Detail

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents