Sound Setup (Sound) - Sony DSX-M80 Operating Instructions Manual

Marine audio media receiver with bluetooth and siriusxm support
Hide thumbs Also See for DSX-M80:
Table of Contents

Advertisement

Help Guide
Marine Audio
DSX-M80

Sound Setup (SOUND)

This setup menu is not available when the source is off and the clock is displayed.
CLEAR AUDIO+ (ClearAudio+)
Reproduces sound by optimizing the digital signal with the Sony recommended sound settings: [ON], [OFF].
(Automatically sets to [OFF] when [EQ10 PRESET] is changed and/or [EXTRA BASS] is set to [1] or [2] and/or [DSO] is
set to [LOW], [MID] or [HIGH].)
EQ10 PRESET (EQ10 preset)
Selects an equalizer curve from 10 equalizer curves or off:
[OFF], [R&B], [ROCK], [POP], [HIP-HOP], [EDM], [JAZZ], [SOUL], [COUNTRY], [KARAOKE]*, [CUSTOM].
The equalizer curve setting can be memorized for each source.
*
[KARAOKE] reduces the vocal sound but cannot fully remove it during playback. Also, using a microphone is not supported.
EQ10 CUSTOM (EQ10 custom)
Sets [CUSTOM] of EQ10.
Setting the equalizer curve: [BAND01] – [BAND10] (32 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz,
16 kHz).
The volume level is adjustable in 1 dB steps, from -6 dB to +6 dB.
POSITION (listening position)
Item
Simulates a natural sound field by delaying the sound output from speakers to suit your position:
F/R POSITION
[FRONT L] (front left), [FRONT R] (front right), [FRONT] (center front), [ALL] (center of your boat),
(front/rear
[CUSTOM] (position set by the advanced boat audio settings on "Sony | Music Center"), [OFF] (no
position)
position set).
ADJ
Fine-tunes the listening position setting:
POSITION
[+3] – [CENTER] – [-3].
(adjust
(Available only when [F/R POSITION] is not set to [OFF] or [CUSTOM].)
position)
SUBW POS
[NEAR] (near), [NORMAL] (normal), [FAR] (far)
(subwoofer
(Available only when [F/R POSITION] is set to other than [OFF].)
position)
DSO (dynamic stage organizer)
Creates a more ambient sound as if there were speakers in the dashboard: [OFF], [LOW], [MID], [HIGH].
(Automatically sets to [OFF] when [CLEAR AUDIO+] is set to [ON].)
Detail
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents