Bosch AUTODOME inteox 7000i 2MP Installation Manual page 59

Table of Contents

Advertisement

AUTODOME inteox 7000i - 2MP (pendant)
Audio Line Level Output Connections
1.
2.
Figure 13.6: Connections for audio over an Ethernet network
1
2
3
4
5
6
Notice!
Separate the audio cables from the AC power lines to avoid noise.
To configure audio on the camera, refer to Basic Mode: Audio or Audio.
Bosch Security Systems
Connect the audio line level input of the audio output device (for example, an amplified
speaker or a PC line level input) to the Audio_Out+ (RXD) output terminal.
Connect the audio line level output signal ground to the Audio_Out- (TXD) output
terminal.
Audio_In- (C-)
Audio_In+ (C+)
Earth Ground
Audio_Out+ (RXD)
Audio_Out– (TXD)
Signal Ground
Installation Manual (pendant)
7
AUTODOME Data In/Out
8
P105/P106 Connector
9
Audio Out
Connection | en
59
2020-07 | 1.0 |

Advertisement

Table of Contents
loading

This manual is also suitable for:

Autodome inteox 7000i

Table of Contents