Bosch AUTODOME inteox 7000i 2MP Installation Manual page 41

AUTODOME inteox 7000i - 2MP (pendant)
Power Supply Box Connections
The following figure is a detailed illustration of the Roof or Pipe Mount Power Supply Box,
which includes the fuse specifications.
Figure 10.3: Power Supply Box Connections
1
2
3
4
Warning!
Fuse replacement by qualified service personnel only. Replace with same type fuse.
!
Fuse Specifications
Volts
24 V
115 V
230 V
The following table lists the Power Supply Box connectors:
No. Connector
Ground
Bosch Security Systems
P101
CONTROL CONTROL
LINE NC NEUT
IN/OUT TO DOM E
1 2 3
P106
GND GND GND T XD RXD XD XD C+ C- GND GND GND
6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1
Ground Screw
Transformer (115/230 VAC Modes)
In/Out to camera
24 VAC to Dome Interface Board
XF101 Mains XF102 Camera
T 5.0 A T 2.0 A
T 1.6 A T 2.0 A
T 0.8A T 2.0 A
Pin 1 Pin 2
Grounding Screw
Installation Manual (pendant)
Installing the Roof Parapet and Pipe Mounts | en
J102 J102 J102 J102
(LED)
O DOM O DOM
P105
T XD RXD XD XD C+ C-
5 Power In
6 In/Out; 1/2 in. (15 mm) NPS Fitting
7 Power In; 3/4 in. (20 mm) NPS Fitting
8 Control Data and Video In/Out; 3/4 in. (20 mm)
NPS Fitting
XF103 Heater
T 3.15 A
T 3.15 A
T 3.15 A
Pin 3 Pin 4 Pin 5 Pin 6
2020-07 | 1.0 |
41