Sony HDCU2500 Maintenance Manual page 97

C08: FRONT INCOM
Menu Image
<FRONT INCOM> C08 TOP
(MIC OFF)(PRIVATE)
INCOM MIC: DYNAMIC
MIC TYPE: UNBALANCE
MIC GAIN: 0dB
SIDE TONE: 50
PGM MIX : OFF
PGM SEL : PGM1
PGM1 LVL: 50
PGM2 LVL: 50
HDCU2500
Item Settings
－ (MIC ON), (MIC
OFF), (PGM
ON)
－ (PROD), (ENG),
(PRIVATE)
INCOM MIC CARBON,
ECM, DYNAM-
IC
MIC TYPE BALANCE, UN-
BALANCE
MIC GAIN –6dB, 0dB, +6dB
SIDE TONE 0 to 99
PGM MIX OFF, INCOM
+PGM, L-IN-
COM/RPGM
PGM SEL PGM1, PGM2,
PGM1 + PGM2
PGM1 LVL 0 to 99
PGM2 LVL 0 to 99
Description
CCU front panel MIC/PGM switch posi-
tion. (Display only)
CCU front panel INTERCOM switch po-
sition. (Display only)
Sets INCOM MIC according to the micro-
phone of headset to be connected to the IN-
TERCOM connector on the front of the
unit.
CARBON: Carbon microphone (power
supply, 20dB gain)
ECM: Electret condenser microphone
(power supply, 40dB gain)
DYNAMIC: Dynamic microphone (no
power supply, 60dB gain)
Sets INCOM MIC according to the micro-
phone of headset to be connected to the IN-
TERCOM connector on the front of the
unit.
BALANCE: Balanced microphone
UNBALANCE: Unbalanced microphone
Sets the input gain.
Sets the side tone level.
OFF: Signals are not mixed.
INCOM+PGM: INCOM and PGM signals
are mixed.
L-INCOM/R-PGM: Outputs an INCOM
signal through the left channel and a PGM
signal through the right.
Sets the PGM level.
Sets the PGM1 level.
Sets the PGM2 level.
3-21