4-5.
Plug-In Board
4-5-1.
Installing/Removing Plug-in Boards on the Front Side
1.
Open the front panel. (Refer to
2.
Raise the lever in the arrow direction to remove each plug-in board.
3.
To install the removed plug-in board, insert it along the guides of each slot and push it so that it is securely connected
to the connector on the MB-1181 board.
Plug-in board
4.
Close the front panel.
HDCU2500
"4-3-1. Removal and Installation of Front
Lever
Plug-in board
Guides
Panel")
MB-1181 board
4-19