Modbus Address Register; Modbus Address Table For Single-Phase Devices With Modbus Interface - Siemens SENTRON 7KT PAC1600 Equipment Manual

Commissioning

6.4 Modbus address register

4. Check the device parameters and adjust them if necessary.
Note
You can only change parameters in offline mode.
You can find more information on parameterization in the powerconfig Online Help.
5. In the "Parameters" window, click the "Load to device" button.
The set parameters are loaded to the device.
6.4 Modbus address register
6.4.1

Modbus address table for single-phase devices with Modbus interface

Continuous measured values
Modbus measured variables with the function codes 03 and 04
Address Number
of regis-
Hex Decimal
ters
0002 2 2
0004 4 2
0006 6 2
0008 8 2
000A 10 2
000C 12 2
000E 14 2
0010 16 2
0012 18 2
0014 20 2
0016 22 2
0018 24 2
001A 26 2
Range limit
0026 38 2
Range limit
0032 50 2
82
Format Access Unit
UINT32 R V
– – –
– – –
UINT32 R A
– – –
– – –
– – –
– – –
– – –
INT32 R W
– – –
– – –
INT32 R var
INT32 R –
INT32 R Hz
Factor Measured variable
0.01 Voltage
– –
– –
0.001 Current
– –
– –
– –
– –
– –
10.0 Active power
– –
– –
10.0 Reactive power
0.01 Power factor
0.1 Frequency
Equipment Manual, 09/2020, 2514284147-04
7KT16 energy meter