Juice Extraction; Emptying; Disassembly - Silvercrest SZP 25 A1 Operating Instructions Manual

Juice extraction

Note:
When pressing out juice, do not exceed the 600 ml
volume marking on the scale of the juice collector
1. Adjust the fruit pulp regulator
that the slits in the fruit pulp sieve
exactly above each other if you wish to have fru-
it juice with fruit pulp. Adjust the fruit pulp regula-
t
tor , by sliding it, so that the slits in the fruit
r y
pulp sieve / are not lying above each other
if you do not wish to have fruit juice with fruit pulp.
2. Cut the fruits in half (orange, lemon etc.)
3. Press the halved fruit lightly onto the squeezing
w e
cone / . The appliance switches itself on
automatically as soon as the squeezing cone
w e
/ is pressed down.
4. Apply pressure at various parts of the fruit rind
with your fingers. Thereby the juice will be even-
ly squeezed out of the fruit.
5. When no more juice flows from the fruit, stop
applying pressure to the squeezing cone
The appliance stops.
6. Press the squeezing cone
ly to loosen it, until it turns in the opposite
direction.
7. When no more juice flows from the fruit, stop
applying pressure to the squeezing cone
The appliance stops. Remove the fruit skin from
the squeezing cone
8. Continue similarly with further fruit-halves until
you have squeezed out the desired volume of
fruit juice. The current volume squeezed can be
read off from the scale on the side of the juice
u
collector .
t
, by sliding it, so
r y
/ lie
w
w e
/ down repeated-
w
w e
/ .

Emptying

Caution:
Remove the power plug from the wall socket when
u
. you empty the fruit pulp sieve
u
collector . Otherwise there is a risk that the appli-
ance could start unintentionally.
• Turn the juice collector
perceptible resistance desists. You can now lift it
from the drive axle

Disassembly

If you wish to disassemble the Citrus Press, e.g. for
the cleaning of it, proceed as follows:
1. Remove the power plug from the wall socket
2. Remove the squeezing cone
3. Remove the fruit pulp sieve
Press the hook on the underside of the upper fruit
pulp sieve
e
/ . light pressure on the fruit pulp sieve
ponents allow themselves to be pressed apart.
4. Turn the juice catchment container
clockwise until the perceptible resistance
diminishes. You can now lift it from the drive
i
axle .
e
/ .
- 5 -
r y
/
u
anti-clock-wise until the
i
and pour the juice out.
w
/
r y
/
r
inwards. At the same time exert
or the juice
o
.
e
.
.
t
. The com-
u
anti-