Bosch WBE 4510 Repair Instructions page 32

en 32 | WBE 4510 - WBE 4515 | Settings
Now the programme requests a password:
R
Press ARROW - UP- OK - RIGHT (service diagnostic
password).
R
Press ARROW DOWN - ARROW DOWN - ARROW UP
(user diagnosis password).
If you have access as a service user you can activate/
deactivate directly the different functions, whereas if
you access as a normal user the menu is only static and
descriptive.
Once you have correctly inserted the password you will
enter the diagnosis menu; to move through the pages
use the keys ARROW (LEFT and RIGHT) and to activate/
deactivate the various functions use the keys ARROW
(UP and DOWN) and OK.
Fig. 6: Menu N° 1:
- Machine software version
- Calibration parameters
- Run a test cycle
- Machine status
Fig. 7: Menu N° 2:
- Encoder disk check
- Motor turns check
- Condenser and relay check
|
1 695 655 167 2014-01-13
Fig. 8: Menu N° 3:
- Measuring gauges potentiometer check
Fig. 9: Menu N° 4:
- Input test of the cover microswitch
- Input test of the flange microswitch
- Input test of the brake microswitch
- Input test of the lifter jaw microswitch
- Input test of the upward/downward motion of the lifter
- Aludata magnet output test
- Electromagnetic brake output test
- Pneumatic flange output test
- Lifter output test
- Jaw output test
- Cover output test
Fig. 10: Menu N° 5:
- Laser trolley output test
- Laser trolley return
- Laser light lighting
- Automatic return of end stroke trolley
Robert Bosch GmbH