Introduction; Video Wheel Balancers Wbe 4510 - Wbe 4515; Using Instructions And Navigation Menu - Bosch WBE 4510 Repair Instructions

en 26 | WBE 4510 - WBE 4515 | Introduction
2.

Introduction

2.1 Video wheel balancers
WBE 4510 - WBE 4515
WBE 4510 is based on the Win CE operating system, is
provided with a 15'' LCD monitor and touch controls.
To the normal functions of dynamic and static balan-
cing, and the different ALU programs and weight sepa-
ration and programs specific for PAX wheels, it adds
control of the eccentricity of the wheel and control of
the drift through a special laser sensor.
The laser sensor also measures automatically the width
of the rim avoiding useless loss of time of the operator
who simply has to measure, by means of the ALUDATA
probe tip, diameter and distance and press the START
button.
The automatic protection cover, the motor control that
stops the wheel in position and the integrated lifter
with wheel locking system, complete the standard
equipment of this machine.
The WBE 4515 adds to the above listed characteristics
also a pneumatic wheel locking/unlocking system.
|
1 695 655 167 2014-01-13
2.2 Using instructions and navigation
menu
Also in case of technical assistance, just like when using
the machine, the action centre is used to navigate the
menu; follow the usage manual of the machine for the
description of the various functions.
Fig. 1: SETUP button
Pressing the SETUP button you enter the setting page.
Notes for technical support
Once the weight holding cover has been removed the
machine will be open when operating, so without the
action centre; but connecting a USB PC keyboard you
can have the same functions with the arrows and return
(OK) keys on the keyboard.
!
WARNING: the balancer functions only when the
program is running.
Robert Bosch GmbH