Siemens LOGO! 8 Manual page 17

2 Solution
No. Action/response
9. Then you need to define which slave LOGO!
input you want to read.
10. The digital network input is displayed in
green, which means that LOGO!-Soft
Comfort V8 has automatically created an
Ethernet connection and a data transfer
mechanism between the master and the
slave LOGO!.
Note:
If the digital network input is displayed in red,
the communication between master and
slave LOGO! is not available anymore.
11. A connecting line has automatically been
created between master and slave LOGO!,
which means that both devices are
communicating with each other.
Note:
Double-click on the connecting line to open
the connection settings with information on
Ethernet connection and data transfer.
12. Repeat the steps from this table to specify
data transfer for additional inputs and outputs
of the slave LOGO!.
Frei verwendbar House Control with Master-Slave - LOGO! Set 9
Entry ID: 64143308, V2.2, 09/2018
LOGO! Soft Comfort V8
17