Siemens LOGO! 8 Manual page 14

2 Solution
Function description
In manual mode, the lights can be controlled with buttons or with the cursor keys
over the LOGO! controller and the LOGO! TDE. In addition, the lights can be
controlled with a tablet, smartphone or PC with the F-keys over the integrated
webserver of LOGO! 8.
The panic mode is activated when one of the light buttons is pressed for at least
3 seconds. All lights are switched on.
The panic mode is deactivated when one of the light buttons is pressed for at least
3 seconds again. All lights are switched off.
The panic mode is automatically deactivated with a time delay of 30 minutes.
Table 2-12
No.
1. Switching lighting in room 1
2. Switching lighting in room 2
3. Switching the exterior lighting
Frei verwendbar House Control with Master-Slave - LOGO! Set 9
Entry ID: 64143308, V2.2,
Function
09/2018
Function block
Pulse relay Light room 1
Pulse relay Light room 1
Pulse relay Outside light
Block name in the
program
14