Display - Sony WRR-800A Operating Instructions Manual

Location of Parts and Controls
5 GP (group) button
Press to change the group or to display frequencies.
6 CH (channel) button
Press to change the channel in a group.
7 VOL. (volume) control
Adjusts the volume of the tuner output.

Display

1 BATT indicator
2 RF indicator
3 AF indicator
4 AF indication
BATT
AF
RF
AF
GP CH
6 EN
5 BATT indication
BATT
6 GP/CH indication
7 RF indications
1 BATT (battery) indicator
5 BATT (battery) indication
Indicate the condition of the wireless microphone
transmitter batteries. The indicator and indication start
flashing about one hour before the transmitter batteries go
flat.
2 RF (radio frequency) indicator
7 RF (radio frequency) indications
The indicator lights and the indications (dots) appear when
the antenna reception is optimal. Depending on the RF input
level, the number of dots changes.
3 AF (audio frequency) indicator
4 AF (audio frequency) indication
The indicator lights and the indication appears when the
audio output level is higher than the reference level.
6 GP/CH (group/channel) indication
Shows the reception channel group and respective channel
number.
Pressing the GP button changes this indication to the
frequency indication.