Specifications - Sony WRR-800A Operating Instructions Manual

Specifications

Tuner
Reception type F3E
Circuit system Dual conversion superheterodyne
Reception frequencies
CE62 model: 800.000 to 814.000 MHz
CE64 model: 816.000 to 830.000 MHz
CE69 model: 854.125 to 862.000 MHz
Local oscillators
Crystal controlled PLL synthesizer
60 dB or more (at ±250 kHz detuned)
Selectivity
Spurious rejection ratio
70 dB or more
Image rejection ratio
70 dB or more
Muting level 30 dBµ 1)
Antenna connectors
BNC-R type (2), 50 ohms
Frequency response
100 to 15,000 Hz ±3 dB
50 µsec
De-emphasis
Signal-to-noise ratio
30 dB or more at an A-weighted RF input
level of 20 dBµ
60 dB or more at an A-weighted RF input
level of 60 dBµ
(±5 kHz deviation at 1 kHz modulation)
Distortion 1% or less (±40 kHz deviation at 1 kHz
modulation)
Tone signal frequency
32.768 kHz
12 EN
2)
Output level 0 dBm (±16 kHz deviation at 1 kHz
modulation)
(–20 dBm (±5 kHz deviation at 1 kHz
modulation))
Output impedance
150 ohms
Output connector
ø6.3 phone balanced (TRS)
1) 0 dBµ=1 µV
2) 0 dBm=0.775 Vrms (600 ohms loaded)
General
Power requirements
9 V DC
Current consumption
Approx. 500 mA
Operating temperature
0°C to 40°C
Storage temperature
–20°C to +55°C
218 × 44 × 210 mm (w/h/d)
Dimensions
Mass Approx. 1.6 kg
Accessories supplied
AC power adaptor (1)
Antennas (2)
Operating Instructions (1)
Design and specifications are subject to change without
notice.