Installation Area; Figure 2.1 Maintenance Area - Fujitsu ETERNUS LT260 User Manual

Chapter 2 LT260 Installation

2.2 Installation Area

2.2 Installation Area
It is necessary to secure a place for the maintenance area as shown in

Figure 2.1 Maintenance area

Front of
the LT260
• Be careful not to have the rack to fall due to the weight of the LT260 during maintenance.
• The maintenance area of the width direction is dependent on the size of the rack.
Reference: the minimum width of our rack is 590mm
• Make sure to have ventilation holes for cooling on the front and rear doors of the rack.
If the door has the specifications with no ventilation holes of perforated metal or mesh metal, make sure
that the temperature inside the rack does not exceed the temperature limit.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Site Planning-
1600
: Maintenance area
: Cable slit
Unit: mm
18
Copyright 2018 FUJITSU LIMITED
Figure 2.1.
900
P3AM-8782-06ENZ0