PR30 and VR30 Control Cabinet PC and
Panel PC
Standard
EN 60068-2-27
EN 61010-1
Tab. 8-1: Standards used
8.2 FCC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
This device may not cause harmful interferences.
●
This device has to tolerate any receiving interferences, including interferences
●
that can cause undesired operation.
8.3 CE marking
8.3.1 Declaration of conformity
The electronic products described in these instructions comply with the
requirements and the target of the following EU directive and the following
harmonized European standards:
EMC directive 2014/30/EU
The electronic products described in the present instructions are intended for
use in industrial environments and comply with the following requirements:
Standard
DIN EN 61000-6-2
DIN EN 61000-6-4
Tab. 8-2: Standards for electromagnetic compatibility (EMC)
Loss of CE conformity due to modifications at the device
CE marking applies only to the device upon delivery. After modifying
the device, verify the CE conformity.
8.4 UL/CSA certified
The devices are certified acc. to
UL 61010-2-201 (Industrial Control Equipment) and
●
CSA22.2 No. 61010-2-201 (CSA)
●
Description
Shock test
Safety requirements for electrical equipment for measurement, control
and laboratory use - Part 1: General requirements
Title
Electromagnetic compatibility (EMC)
Part 6-2: Generic standards – Immunity for
industrial environments
Electromagnetic compatibility (EMC)
Part 6-4: Generic standards – Emission standard
for industrial environments
R911384706_Edition 01 Bosch Rexroth AG
11/45
Standards