Table of Contents
Advertisement
PR30 and VR30 Control Cabinet PC and
Panel PC
9.3 USB interfaces XUSB1 to XUSB4
The devices are provided with four USB interfaces on the connector panel
(XUSB1/2: SB 3.0, XUSB3/4: USB 2.0).
Fig. 9-5: USB interfaces
The maximum current carrying capacity per USB socket is 500 mA
for the USB2.0 and 900mA for the USB3.0.
9.4 Ethernet interfaces XETH1, XETH2 and XETH3
The control cabinet PC can be connected to an Ethernet network via the
Ethernet interfaces XETH1, XETH2 and XETH3.
9.5 Antenna connection
At the extension stage is "WLAN" or "4G", the provided antenna is connected to
the antenna socket.
9.6 DisplayPort XDP
At the display port (XDP), an operating display DR or a monitor can be
connected to the display port interface. An active converter is required to
connect a DVI or HDMI monitor. No image is shown if a passive converter is
used.
9.7 Long distance XCDI+tx
At the long-distance (XCDI+tx), A cable length of up to 100 m can be used to
interconnect remote operating displays to the individual devices.
Fig. 9-6: XCDI+ connection
R911384706_Edition 01 Bosch Rexroth AG
15/45
Interfaces
Advertisement
Table of Contents
