Materials; Applicable Standards - ABB ACS800 Series Hardware Manual

126

Materials

Drive enclosure
Package
Disposal

Applicable standards

• EN 50178:1997
• EN 60204-1:2006 +A1:2009 Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
• EN 60529:1991
+ corrigendum May 1993
+ A1:2000
• IEC 60664-1:2007
• EN 61800-3:2004
• UL 508C (2002)
• NEMA 250 (2003)
• CSA C22.2 No. 14-05
(2005)
Technical data
• PC/ABS 2.5 mm, colour NCS 1502-Y (RAL 9002 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 to 2 mm, thickness of coating 100 micrometres
• cast aluminium AlSi (R2 and R3)
• extruded aluminium AlSi (R4 to R6)
Depends on the frame size and selected options: cardboard, heavy duty cardboard or
plywood, EPS cushions (expanded polystyrene), wooden pallet
Plastic covering of the package: PE-LD, bands PP or steel.
The main parts of the drive can be recycled to preserve natural resources and energy.
Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious metals
can be recycled as material. Plastics, rubber, cardboard and other packaging material can
be used in energy recovery. Printed circuit boards and DC capacitors (C1-1 to C1-x) need
selective treatment according to IEC 62635 guidelines. To aid recycling, plastic parts are
marked with an appropriate identification code.
Contact your local ABB distributor for further information on environmental aspects and
recycling instructions for professional recyclers. End of life treatment must follow
international and local regulations.
Electronic equipment for use in power installations
Provisions for compliance: The final assembler of the machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device.
Degrees of protection provided by enclosures (IP code)
Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests.
Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific
test methods
UL Standard for Safety, Power Conversion Equipment, second edition
Enclosures for Electrical Equipment (1000 Volts Maximum)
Industrial control equipment