Access Control System; Access Actuator - Huawei FusionModule2000 Product Description

FusionModule2000 Smart Modular Data Center
Product Description (380 V)
Indicat
or
RF_Z
Communications Ports
The skylight actuator provides one DO port (LOCK/GND) and one DI port (BUTTON/GND).
Table 3-68 lists the LOCK/GND/BUTTON/GND port pin definitions.
Table 3-68 LOCK/GND/BUTTON/GND port pin definitions
Item
LOCK/GND
pin sequence
BUTTON/GN
D pin
sequence

3.4.7 Access Control System

3.4.7.1 Access Actuator

The access actuator is the control component for the aisle door of a smart module. It connects
to the ECC800 controller system over FE port or wireless networking (802.15.4). It opens the
magnetic lock by detecting the card swiping information of the card reader, door open button
information, and equipment room fire linkage information. It has access right management,
access event record, and alarm record functions.
Figure 3-71 shows an access actuator.
Issue 04 (2017-06-30)
Col Name
or
Gree Communication
n status indicator
Description
LOCK 12V_OUT
GND GND
BUTTON DI3
GND GND
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Description
Off No system alarm is generated.
Steady on No network parameters exist, or a
network is to be created.
Blinking at A network is set up, and no node
long intervals access is allowed (the indicator
blinks at 0.5 Hz, on for 1s and then
off for 1s).
Blinking at A network is set up, and node
super short access is allowed (the indicator
intervals blinks at 10 Hz, on for 0.05s and
then off for 0.05s).
Blinking The skylight actuator is searching
intermittently for a network (the indicator blinks
at super short at super short intervals for 0.5s and
intervals then turns off for 0.5s).
3 System Architecture
101