Commissioning Access Control Components - Huawei FusionModule1000A40 Commissioning Manual

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
Step 5 Log in to the ECC800 WebUI.
1.
2.
----End

8.3.2 Commissioning Access Control Components

Prerequisites


Preparations
Tools: step ladder, Phillips screwdriver
Issue 04 (2020-01-17)
1. Open Internet Explorer and choose Tools > Internet Options > General.
2. Select Delete browsing history on exit and click Delete.
3. In the Delete Browsing History dialog box, select all options except Password, and click Delete.
Enter https://monitoring IP address (such as monitoring IP address
https://192.168.1.10) in the address box of the browser, and then press Enter to enter
the WebUI login page.
Figure 8-19 WebUI login page
On the login page, enter the preset user name admin and preset password Changeme,
set the language, and click Log In.
 After the first login, change the password in time to ensure account security and prevent
unauthorized network attacks, such as data tampering. Huawei will not be liable for any security
issues caused by your failure to change the preset password in time or password loss after changing.
 An account is logged out due to timeout if no operation is performed within 10 minutes after system
login.
 It is recommended that a maximum of three users log in to the ECC800 WebUI at the same time.
You have powered on the access control system.
You have configured the IC cards.
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
70