Operator Control And Monitoring Via Monitoring Table - Siemens SINAMICS G110M Manual
Speed control of a startdrive with tia portal via profibus dp with safety integrated (via terminal) and hmi
Hide thumbs
Also See for SINAMICS G110M:
- Operating instructions manual (428 pages) ,
- Original instructions manual (344 pages) ,
- Function manual (244 pages)
Table of Contents
Advertisement
4 Operating the Application
4.4 Operator Control and Monitoring via monitoring table
Figure 4-8: Display of fault buffer message in plain text
The message text is displayed for as long as the message number is pressed.
4.4
Operator Control and Monitoring via monitoring table
You can also use the application without HMI panel. The watch tables
"Process_data" and "Parameters" have already been created in the project. The
tags you can monitor or control are the same which are also displayed or controlled
at the operator panel.
Table 4-4: Operation of the application via watch table
No.
Action
1.
In the TIA Portal project you open the
desired watch table.
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469,
V1.4,
07/2018
Remarks
27
Hide quick links:
Advertisement
Table of Contents
