Siemens SINAMICS G110M Manual page 18

3 Setting up and commissioning the application
3.5 Loading the software
No. Action
23. 1. Exit the PROFINET settings
with OK.
2. Exit the Control Panel.
3. Prepare the loading process
by clicking the "Transfer"
button.
24. Unless already performed,
connect the HMI KTP600 with an
Ethernet patch cable to the PG/PC
directly or via a switch and start
the data transfer.
The HMI control panel will then
start automatically.
When working without switch,
connect the control panel to the
Ethernet port of the SIMATIC
CPU.
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469, V1.4, 07/2018
Remarks
1
3
2
18