NEC SL2100 Features And Specifications Manual page 554

SL2100
DID Services for either ISDN - BRI or PRI:
Program
No.
22-02-01 Incoming Call Trunk Setup - Trunk Service Type
22-09-01 DID Basic Data Setup - Dial-In Receive digit
I
22-11-01 DID Translation Table - Received Number
22-11-02 DID Translation Table - Target Number
Calling Party Number Presentation for either ISDN - BRI or PRI:
Program
No.
10-03-05 ETU Setup (PRTA PKG Setup) - CLIP Information
Announcement
15-01-04 Basic Extension Data Setup - ISDN Caller ID
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-08-13 Class of Service Options (Outgoing Call Service)
- Set Calling Party Number
21-12-01 ISDN Calling Party Number Setup for Trunks -
Calling Party Number Data
21-13-01 ISDN Calling Party Number Setup for Extensions
- Calling Party Number Data
ISDN - PRI Network Specific Assignment:
Program
No.
26-02-07 Dial Analysis Table for ARS/LCR - Network
Specified Parameter Table
1-540
Program Name
Program Name
Program Name
Input Data
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
1 ~ 8
Maximum eight digits
(0 ~ 9, , #, @)
*
Maximum 36 digits
(0 ~ 9, , #, @)
*
Input Data
0 = No
1 = Yes
0 = Disabled (CPN is NOT sent.)
1 = Enabled (CPN is sent.)
1 ~ 15
0 = Off (when set to Off the sys-
tem will not send any outbound
calling party information.)
1 = On (when set to ON the sys-
tem will send calling party infor-
mation for the station or trunk.)
Maximum of 16 digits (0 ~ 9, ,
*
#)
Most Telco's will only accept 10
digits.
Maximum of 16 digits (0 ~ 9, ,
*
#)
Most Telco's will only accept 10
digits.
Input Data
0 ~ 16
ISSUE 1.0
Default
0
2
Refer to Programming
Manual.
Refer to Programming
Manual.
Default
1
1
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
No Setting
No Setting
Default
0
ISDN Compatibility