Samsung OfficeServ 7200 Technical Manual page 79

OfficeServ 7200
TECHNICAL MANUAL
Figure 7.20 Connecting a Station Device to a KDB via MDF
CONNECTING TO THE KDBS
There are two methods for connecting devices to keyset daughterboards. The simplest
method is to connect the second device directly by means of a line cord.
7.18 and 7.19.
The second method is to use a multi-pair station cable, connecting separate station
jacks to the first two pairs. A line cord can now be connected between the
daughterboard and the second jack. This returns the daughterboard port to the MDF
for cross-connection to another cable run
PART 7 SEPTEMBER 2005
(see Figure 7.20).
7.14
Table of Contents
Home Page
INSTALLATION
See Figures