Operation; Pre-Settings - Siemens FXS2061-O User Manual

4 Operation

4.1 Pre-settings

Building Technologies
Fire System
To enable the 'FXS2061-O Wireless Diagnostic Tool' software to communicate with
devices, the PC must be connected to the MCL-USB adapter (radio) FDUZ227.
The adapter establishes the radio connection to the devices. With the radio
gateway, a faster connection can be established using a cable as an alternative.
Prerequisite:
The 'FXS2061-O Wireless Diagnostic Tool' software and the driver are installed
on the PC.
The devices are supplied with power.
The devices are logged on to the radio gateway.
If the devices are connected to a detector line via the radio gateway, some
parameters can be set from the fire control panel. These parameters cannot then
be changed with the 'FXS2061-O Wireless Diagnostic Tool' software. The
relevant fields have a gray background.
Navigating in the software
Navigation in the software takes place using the normal Windows interface and
Windows commands.
In the 'Options' main menu, you can manage the saved pre-settings in the
'Preferences' menu.
DSV settings only become active after a new connection is established.
A change of language only takes effect once the
'FXS2061-O Wireless Diagnostic Tool' software is restarted.
The units cannot be changed.
The 'Preferences' menu allows you to make settings for:
General
– Path for additional documents
– Language selection
– Setting the transmitting power of 'FDUZ227 MCL-USB adapter (radio)'
– Calling a device list automatically
– Deleting tool memory
DSV
Firmware packages
Device
Help
Configurations
Operation
4
Pre-settings
39 | 64
A6V10425605_b_en_--
2016-12-12