Network' Task Card - Siemens FXS2061-O User Manual

3.5 'Network' task card

Building Technologies
Fire System
You can use the ' Network' task card to carry out reading and configuring
directly on the radio gateway. The 'FXS2061-O Wireless Diagnostic Tool' software
is in direct contact with the radio gateway and can access the current radio
gateway data and its data collection from the devices. You can tell the age of the
data from the data collection. It is possible to set the interval for renewing the data
collection. Renewing the data collection requires time and energy.
Renewing the data collection requires time and energy. Rereading the data can
take up to two hours depending on the complexity of the radio cell.
Figure 7: 'Network' task card
Indication Action
Network outline List of networks
Information and selection of connected devices
Gateway device list List of devices in the selected radio gateway
Neighbourhood table List of quality information for the radio connection
Commanding List of commands
GUI
3
'Network' task card
27 | 64
A6V10425605_b_en_--
2016-12-12