Block Search - Siemens SINUMERIK 828D Manual

General information on workpiece production

2.11.4 Block search

You can perform a block search in the Reset machine state. The program data is prepared in
such a way that all relevant parameters (tool, zero offsets, M functions, etc.) are available when
accessing the program.
Possible search variants:
Precise return to the point of interruption, even after power off
To any CNC block in the DIN/ISO programs
To any subprogram levels in DIN/ISO programs
Machining step programs and position patterns in ShopMill
Accelerated block search in large mold-making programs
To use the block search:
The block search can be configured individually using the Search mode softkey
and without calculation or with/without approach.
Using the Interruption point softkey
program.
Using the Search pointer
e.g. specific line number, mark or text.
Start search performs the search; CYCLE START executes the program at the search
4
location.
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
a jump is made to the last executed line of the NC
2
you can define the search target within an NC program,
3
2.11
4
1
2
3
e.g. with
1
67