Example With 3+1 Axes Milled - Siemens SINUMERIK 828D Manual

7.4
3+1 axis finishing
156
Difference between 3, 3+2 and 5 axes
7.4

Example with 3+1 axes milled

In the second example, the X axis has been at an angle of 25°.
N100 T="K_D6"
N110 M6
N120 R1=8000
N130 R2=8000
N145 R3=8000
N150 S18000
N160 M03 M8 G54 G17 G90
N170 CYCLE800(4,"TABLE",200000,39,0,0,0,
0,0,0,0,0,0,1,,1)
N180 CYCLE800(4,"TABLE",101,39,,,,0,25,,,,,
-1,100,1)
N190 CYCLE832(0.005,1,1)
N200 G00 X-3.9247 Y-5.5063 Z10
N210 G00 X-3.9247 Y-5.5063 Z-6.7226
N220 G01 X-3.9247 Y-5.5063 Z-11.7226
F=R1
N230 G01 X-3.9224 Y-5.503 Z-11.7235 F=R2 ;
N290 ...
N4580 G00 X102.5039 Y46.3472 Z10
N4600 CYCLE832()
N4610 CYCLE800(4,"TABLE",110000,39,0,0,0,
0,0,0,0,0,0,0,,1)
N4620 CYCLE800()
N4630 M5
N4640 M30
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
; Selection of the ball mill with D=6
; Loading of tool
; R1 to R3 are variables for feedrates
;
;
;
;
; Swivel to basic position
; Swivel about the X axis by 25°
; High Speed Settings finishing with
tolerance 0.005
; Approach with G0
;
; Begin machining
;
;
; Deselect High Speed Settings
; Swivel to basic position
; Deselect swivel
;
; End of program