Simultaneous Recording - Siemens SINUMERIK 828D Manual

General information on workpiece production

2.10.3 Simultaneous recording

In Automatic mode, i.e. during the program execution on the machine, the tool movements can
be simultaneously recorded in the top view, the three-side view or in the 3D view (with the 3D
simulation option). This option is especially useful when the working area of the machine cannot
be viewed clearly. During simultaneous recording, similar functions are available as for
simulation.
Activating simultaneous recording:
Before starting the NC program, press the Sim. rec. softkey
The execution of the program is simultaneously recorded after pressing CYCLE START. You
can display the tool paths and the workpiece machining in parallel to the machining.
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
.
1
1
2.10
→ Top view
→ 3D view
→ Side views
→ Zoom, magnify,
turn, cut
→ Displaying the
tool
63