LUNA2000-(5-30)-S0
User Manual
Figure 3-8 Inverter (with batteries) + Inverter (without batteries)
When the inverter switches to the off-grid state, different output primary loads of the Backup
Box cannot be connected in parallel due to different output phases of off-grid inverters.
Therefore, the primary loads must be connected to different buses.
3.2.2 Setting the Grid-tied and Off-grid ESS Mode
The grid-tied and off-grid ESS switches the inverter to the grid connection status through the
Backup Box. When the grid fails, the ESS supplies power to primary loads in backup mode.
Enabling Off-grid Mode
On the home screen, choose Settings > Feature parameters and enable Off-grid mode.
Issue 01 (2020-09-18)
This mode can be used together with the self-consumption or time-of-use mode.
−
When the grid is normal, the self-consumption or time-of-use mode is used.
After the grid fails, the ESS switches to the power backup mode. The battery
−
backup time depends on the battery SOC when the grid fails. (The battery SOC for
power backup can be set based on customer requirements.)
Copyright © Huawei Technologies Co., Ltd.
3 Application Scenarios and Settings
28