Disclaimer - Philips Xitanium LED Xtreme SR Design-In Manual

Disclaimer

Note that the information provided in this document is subject to change.
This document is not an official testing certificate and cannot be used or construed as a document authorizing or otherwise supporting an official release of a luminaire. The
user of this document remains at all times liable and responsible for any and all required testing and approbation prior to the manufacture and sale of any luminaire.
The recommendations and other advice contained in this document, are provided solely for informational purposes for internal evaluation by the user of this document. Signify does
not make and hereby expressly disclaims any warranties or assurances whatsoever as to the accuracy, completeness, reliability, content and/or quality of any recommendations and
other advice contained in this document, whether express or implied including, without limitation, any warranties of satisfactory quality, fitness for a particular purpose or non-
infringement. Signify has not investigated, and is under no obligation or duty to investigate, whether the recommendations and other advice contained in this document are, or
may be, in conflict with existing patents or any other intellectual property rights. The recommendations and other advice contained herein are provided by Signify on an "as is"
basis, at the user's sole risk and expense.
Specifically mentioned products, materials and/or tools from third parties are only indicative and reference to these products, materials and/or tools does not necessarily mean they
are endorsed by Signify. Signify gives no warranties regarding these and assumes no legal liability or responsibility for any loss or damage resulting from the use of the information
thereto given here.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
©2019 Signify Holding B.V. All rights reserved.
Note that the information provided in this document is subject to change.
Date of release: April 19, 2019
www.philips.com/oem
40