Warnings and instructions
Design-in Guide - Philips Xitanium LED Xtreme SR driver
Safety warnings:
• Avoid touching live parts!
• Do not use drivers with damaged housing and/or
connectors!
• Do not service the driver when the mains
voltage is connected; this includes connecting or
disconnecting the LED module.
Safety warnings and installation instructions
• Do not use damaged products
• Do not use Xitanium LED Xtreme SR drivers in luminaire-to-
luminaire applications. All SR and auxiliary supply wiring must
remain within the luminaire.
•
The luminaire manufacturer is responsible for its own
luminaire design and compliance with all relevant safety
standards including minimum required IP rating to protect the
driver.
•
The Xitanium LED Xtreme SR drivers are suitable
for built-in use only and must be protected
ingress of and exposure to including but not limited to snow,
water, ice, dust, insects or any other chemical agent - be it
the gaseous, vapor, liquid or solid form- which can be
expected to have an adverse effect on the driver (e.g.
use in wet/corrosive/ dusty
responsibility of both luminaire manufacturer and installer to
prevent ingress and exposure. Any suggestion from Philips
with reference to minimum
serves only as a non-binding guidance; a different
may be required under certain application conditions to
protect the driver. Common sense needs to be used in
order to define the proper luminaire IP rating for the
application.
• Do not service the driver when mains voltage is connected;
this includes connecting or disconnecting the LED module. The
driver generates an output voltage of the driver that may be
lethal. Connecting a LED module to an energized driver may
damage both the LED module and driver.
• No components are allowed between the LED driver and the
LED module(s) other than connectors and wiring intended to
connect the Xitanium driver to the LED module.
• Adequate earth and/or equipotential connections needs to
be provided whenever possible or applicable.
• Philips Design-in support is available; please contact your
Philips sales representative.
against
environments). It is the
required luminaire IP rating
IP rating
in
4