Inserting The Sim Card - Nokia FastMile Installation Manual

Nokia FastMile 4G Receiver Installation Guide

9.2 Inserting the SIM card

Although the following procedure provides instructions for inserting a SIM card in the
Nokia FastMile 4G Receiver, you should contact your Nokia representative for more
detailed information.
Procedure 5
1
2
Figure 8
Issue: 02 DRAFT
To avoid the possibility of a short circuit, make sure
Warning —
that the Nokia FastMile 4G Receiver is in a powered off state
before inserting the SIM card.
If the SIM card needs to be replaced later on, the
Warning —
Nokia FastMile 4G Receiver needs to be put in a powered off
state before you extract the SIM card and insert the new one.
To insert the SIM card in the Nokia FastMile 4G Receiver
Use a TORX T8 screwdriver to remove the cover from the SIM card slot of the Nokia FastMile
4G Receiver.
Insert a valid Nano/4FF SIM card in the SIM card slot, with the bottom of the SIM card facing
you as shown in Figure 8.
Figure 8 shows the orientation for inserting the SIM card in the SIM card slot of the Nokia
FastMile 4G Receiver.
Orientation of the SIM card
For the Compact mono-band and ABA models, insert the SIM card in the correct orientation
using your fingers, and then use a small plastic blunt tool to carefully push the SIM card all
the way in.
3TG-00387-AADA-TCZZA
Inserting the SIM card in the Nokia FastMile 4G
Receiver
28884
23