Nokia FastMile Installation Manual page 100

Mounting and connecting the Nokia FastMile 4G
Receiver
Table 5
Table 6
20
76
The status LED behaves differently depending on whether the Nokia FastMile 4G Receiver
will be remotely managed from:
•
the Nokia Altiplano FastMile Controller (through NETCONF): see Table
•
an ACS (through TR-069): see Table
Status LED behavior for a Nokia FastMile 4G Receiver remotely
managed from the Nokia Altiplano FastMile Controller
LED color LED priority
Blue First priority
Red Second priority
Green Third priority
Status LED behavior for a Nokia FastMile 4G Receiver remotely
managed from an ACS
LED color LED priority
Blue First priority
Green Second priority
If you installed a Compact multi-band model of the Nokia FastMile 4G Receiver, you can
check the signal strength LEDs on the Nokia FastMile 4G Receiver by pressing the
measurement button on the side of the unit. Figure
measurement button.
3TG-00387-AADA-TCZZA
Nokia FastMile 4G Receiver Installation Guide
6
LED behavior
Blinking
Solid
Off
Blinking
Solid
Off
Blinking twice per second
Blinking one per second
Solid
Off
LED behavior
Blinking
Solid
Off
Blinking twice per second
Blinking one per second
Solid
Off
57 shows the location of the
5
Status information
Bluetooth connection in progress
Bluetooth connection established
No Bluetooth connection
Critical alarm
Major or minor alarm
No alarm
Kernel and application start up
Application start up
Start up
OAM link is established
Status information
Bluetooth connection in progress
Bluetooth connection established
No Bluetooth connection
Kernel and application start up
Application start up
Start up
Software is stable
Issue: 02 DRAFT