Huawei B2368 Series User Manual page 94

LTE CPE B2368 User's
Guide
Figure 12-3 Add New / Edit PCP Figure 12-3 Add New / Edit PCP
The following table summarizes the available fields on this screen.
Table 12-2 Add New / Edit PCP Table 12-2 Add New / Edit PCP
Item
In general
Active
Name of PCP (Parental
Control Profile)
network user
Setting up access to services
Day
Time (start end)
Time
network service
setting network If you select Block, LTE modem will block access to the web setting network If you select Block, LTE modem will block access to the web setting network If you select Block, LTE modem will block access to the web setting network If you select Block, LTE modem will block access to the web
Issue 01
Description
Check this box to activate the relevant rules.
A descriptive name for the rule restricting access.
Select from the drop-down list, a user on the LAN to which you want the rule to
relate. If you choose Custom settings relate. If you choose Custom settings
enter the MAC address below. If you choose All, rule will apply to all users on enter the MAC address below. If you choose All, rule will apply to all users on enter the MAC address below. If you choose All, rule will apply to all users on
the LAN.
Check the box days of the week in which you want to enable Parental
LTE modem.
Enter the time scope of the rules of parental control in 24-hour format.
Use the sliders to set the time interval after which the user will have the
LAN enabled access to services.
Copyright © Huawei Technologies Co., Ltd.
12 Parental
91