Screen Connection - Huawei B2368 Series User Manual

LTE CPE B2368 User's
Guide
Figure 8-4 Network Settings> NAT> DMZ Figure 8-4 Network Settings> NAT> DMZ
The following table summarizes the available fields on this screen.
Table 8-3 Network Settings> NAT> DMZ Table 8-3 Network Settings> NAT> DMZ
Item
Address
default server
Use
Cancel

8.4 Screen connection

using the screen Connection You can set the limit concurrent NAT connection for each client device. Enter using the screen Connection You can set the limit concurrent NAT connection for each client device. Enter using the screen Connection You can set the limit concurrent NAT connection for each client device. Enter
this screen by clicking on Network Settings> NAT> Connections. this screen by clicking on Network Settings> NAT> Connections.
Figure 8-5 Network Settings> NAT> Connections Figure 8-5 Network Settings> NAT> Connections
The following table summarizes the available fields on this screen.
Issue 01
Description
Enter the IP address of the DMZ host, if available. Value 0.0.0.0 Enter the IP address of the DMZ host, if available. Value 0.0.0.0
It means that this feature is disabled.
Clicking Use save your changes. Clicking Use save your changes. Clicking Use save your changes.
Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section.
Copyright © Huawei Technologies Co., Ltd.
8 Network Address Translation (NAT)
71