Telephone Calls And Voip - Huawei B2368 Series User Manual

LTE CPE B2368 User's
Guide
The following factors may cause interference:
•
•
•
To optimize the speed and quality of the wireless connection, you can:
•
•
•
•
•
What wireless security mode LTE modem supports this?
Security is a key aspect of any wireless network. Protects communications between wireless
stations, access points and cable networks.
Available security modes in your facility are as follows:
•
•

27.6 Telephone calls and VoIP

Phone port does not work / the headset is not heard a dial tone.
Step 1 Check your telephone cable connection and the cable itself. Step 1 Check your telephone cable connection and the cable itself.
- - - - End
I have access to the internet, but I can not make VoIP calls.
Step 1 Indicator PHONE should illuminate. Make sure that your phone is connected to the PHONE jack. Step 1 Indicator PHONE should illuminate. Make sure that your phone is connected to the PHONE jack. Step 1 Indicator PHONE should illuminate. Make sure that your phone is connected to the PHONE jack. Step 1 Indicator PHONE should illuminate. Make sure that your phone is connected to the PHONE jack.
step 2 Status VoIP telephony can also check on the screen Information about the system. step 2 Status VoIP telephony can also check on the screen Information about the system. step 2 Status VoIP telephony can also check on the screen Information about the system.
step 3 If all settings are correct VoIP telephony, try using speed dial step 3 If all settings are correct VoIP telephony, try using speed dial
contact another phone connected to the network. If the call is successful, it is possible that a fault has occurred SIP
server. Contact your VoIP service provider.
- - - - End
Issue 01
Obstacles such as walls, ceilings, furniture, etc..
Building materials such as metal doors, aluminum constructions.
Electrical devices: microwaves, monitors, electric motors, cordless phones and other wireless devices.
If the signal strength is low, move wireless devices closer to the access point (AP).
Reduce wireless interference that may cause other wireless networks or ambient electronics, for example.
Cordless phones.
Place the access point (AP), so that between the AP and the wireless client were minimal obstructions (such as
walls and ceilings).
Reduce the number of wireless clients simultaneously connecting to the same AP, or add another AP.
Try to close some programs using the Internet, especially applications like peer-to-peer. If a wireless
client sends or receives a lot of information, it is possible that the there are too many programs connected
to the Internet.
WPA2-PSK ( recommended) this method of security is based on a shared key WPA2. WPA2-PSK ( recommended) this method of security is based on a shared key WPA2.
WPA-PSK: The modem uses WPA-PSK or WPA2-PSK depending on which security mode supports WPA-PSK: The modem uses WPA-PSK or WPA2-PSK depending on which security mode supports
wireless client.
Copyright © Huawei Technologies Co., Ltd.
27 Troubleshooting
171